Force 180

El módulo de abonado ePMP ™ Force 180 5 GHz es la próxima generación de la radio integrada ePMP 5 GHz que ofrece una antena de parche integrada de 16 dBi de mayor ganancia. La instalación y la alineación son fáciles con el soporte de montaje ajustable, y la Force 180 es pequeña, elegante y está equipada con un puerto Gigabit Ethernet para ofrecer el máximo rendimiento.

  • El ePMP Force 180 de Cambium Networks ofrece más de 200 Mbps de rendimiento de usuario real. Con tecnologías 2×2 MIMO-OFDM, las implementaciones de ePMP logran velocidades de datos líderes en la industria.
  • La radio integrada ePMP Force 180 se puede configurar como un módulo de abonado, un punto de acceso no sincronizado o una radio de retroceso. Esta radio funcionará como cliente de una radio sincronizada con GPS ePMP en una implementación punto a multipunto (PMP) o punto a punto (PTP) formando una solución sincronizada con GPS.
PRODUCT 
Model/Part#See table below for full set of Model and Part Numbers
SPECTRUM 
Channel SpacingConfigurable on 5 MHz increments
Frequency Range5150 – 5970 MHz (exact frequencies as allowed by local regulations) 
Channel Width5 I 10 I 20 I 40 MHz
INTERFACE 
MAC (Media Access Control) LayerCambium proprietary and optionally standard 802.lln
Physical Layer2×2 MIMO/OFDM
Ethernet Interfaced100/lOOOBaseT, rate auto negotiated, 802.3at compliant
Powering Methods Supported56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Protocols UsedIPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
Network ManagementIPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro™
VLAN802.lQ with 802.lp priority
PERFORMANCE 
Subscribers per SectorUp to 120; Lite version limited to 10
ARQYes
Nominal Receive Sensitivity (w/FEC) @20MHz ChannelMCSO = -93 dBm to MCS15 = -69 dBm (per branch)
Nominal Receive Sensitivity (w/FEC) @40MHz ChannelMCSO = -90 dBm to MCS15 = -66 dBm (per branch)
Modulation Levels (Adaptive)MCSO (BPSK) to MCS15 (640AM 5/6)
GPS SynchronizationYes, via internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Quality of ServiceThree-level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast, 
and Station Priority
Transmit Power Range0 to +30 dBm (combined, to regional EIRP limit) (1 dB interval)
RECOMMENDED ANTENNAS 
Sector AntennaePMP Sector Antenna (C050900D021A) available
ePMP 2000 Smart AntennaePMP 2000 Smart Antenna (C050900D020A) available (complimentary; does not replace Sector Antenna)
PHYSICAL 
Sector Antenna Connection2 x 50 ohm, RP (reverse polarity) SMA
Beamforming Antenna Connection2 x 50 ohm, RP (reverse polarity) SMA, DC coupled (powering antenna)
GPS Antenna Connection1 x 50 ohm, RP (reverse polarity) SMA
Surge Suppression1 Joule Integrated
EnvironmentalIP55
Temperature-30°C to +55°C (-22°F to +131°F)
Power Consumption20 W Maximum [1]
Input Voltage44 V to 59 V
Weight0.7 kg (1.54 lbs.) without brackets
Dimensions125 x 210 x 37 mm (4.9 x 8.3 x 1.5 in.) without brackets
Pole Mount IncludedYes
Environmental Cover IncludedYes
SECURITY 
Encryption128 bit AES (CCMP mode)
CERTIFICATIONS 
FCCIDZ8H80FT0020
Industry Canada Cert109W-0020
CE

EN 301 893 V2.1.1  

EN 302 502 V2.1.1

Notes:
[1] The maximum power consumption of the Access Point is the same regardless of whether the optional Smart
Beamforming Antenna is equipped or not. This is because the Beamforming Antenna draws its power during the uplink
cycle when the Access Point power consumption is not at its maxium.

Tecnología que conecta negocios
Soluciones integrales en telecomunicaciones y conectividad

En Codipro desarrollamos soluciones tecnológicas orientadas a optimizar la conectividad, el rendimiento y la continuidad operativa de empresas y operadores. Trabajamos con infraestructura de alto nivel y tecnologías de última generación para ofrecer redes confiables, seguras y escalables, adaptadas a las necesidades de cada proyecto.